behars Loading... Please wait...

Nickel-Bond 3 Electrically Conductive, Nickel Filled Epoxy Adhesives, Room Temp Cure

$5.99
Brand Name:
Epoxy International
Quantity:

Product Description

NICKEL FILLED ELECTRICALLY CONDUCTIVE EPOXY ADHESIVE


PRODUCT DESCRIPTION:

Nickel-Bond 3 Electrically Conductive, Nickel Filled Epoxy Adhesives, Room Temp Cure is an epoxy adhesive and coating formulation based on Nickel. This epoxy nickel formulation offers the maximum continuity of conductivity with an electrical resistivity value of less than 3.8x10-2 ohm-cm.

Nickel-Bond 3 Electrically Conductive, Nickel Filled Epoxy Adhesives, Room Temp Cure is recommended for electronic bonding and sealing applications that require both fine electrical and mechanical properties.

Nickel-Bond 3 Electrically Conductive, Nickel Filled Epoxy Adhesives, Room Temp Cure has been used extensively in such diversified applications as microwave EMI & RFI shielding, in the assembly or repair of printed circuit boards, wave guides, electronic modules, flat cable, high frequency shields, connections, circuitry and as a cold solder for high-sensitive components where hot-soldering is impractical.

GENERAL PROPERTIES:

Appearance Grey
Cure Type Heat cure or Room temperature
Benefits High strength
Perfect bond
Cold solder for high-sensitive components
Mix Ratio by weight 100:5 / Resin:Hardener
Substrates Excellent choice aluminum, copper, magnesium, steel, bronze, nickel, kovar, ceramic, glass, phenolic and G-10 epoxy glass boards.
Minimum Bond Line Thickness 1mm
Glass Transition Temp, Tg 50 C
Typical Applications Electrical, conductive, rmi/efi shielding, circuitry, printed circuit board and electronics repair

UNCURED PROPERTIES:

Viscosity @ 25 C cps Paste
Specific Gravity, mixed 2.79
Reactive solids contents, % 100
Pot Life 1 Hour
Shelf Life 1 Year

CURED PROPERTIES:

Hardness, Shore D 85
Shrinkage linear in/in 0.003
Tensile Strength, psi 9500
Volume Resistivity ohm. cm < 0.038
Compressive Strength, psi 14,000

CURE SCHEDULE:

15 minutes @ 100C
45 minutes @ 50C
24 hours Room temperature

THERMAL CONDUCTIVITY:

Thermal Conductivity, btu/hr/ft2/F/in 9.4
Thermal Expansion Coefficient, (cm / cm / C 10-5) 1.5
Heat Distortions, C 95
Operating Temperature Range, C -50 to +170

GENERAL INFORMATION:

For safe handling information on this product, consult the Material Safety Data Sheet, (MSDS).

HOW TO USE:

1) Carefully clean and dry all surfaces to be bonded.

2) Apply Nickel-Bond 3 Electrically Conductive, Nickel Filled Epoxy Adhesives, Room Temp Cure completely mixed adhesive to the prepared surfaces, and gently press these surfaces together. Contact pressure is adequate for strong, reliable bonds; however, maintain contact until adhesive is completely cured.

3) Some separation of components is common during shipping and storage. For this reason, it is recommended that the contents of the shipping container be thoroughly mixed prior to use.

4) Some ingredients in this formulation provided may crystallize when subjected to low temperature storage. A gentle warming cycle of 52C for 30 minutes prior to mixing components may be necessary. Crystallized epoxy components do not react as well as liquid components and should be re-dissolved prior to use for best results.

AVAILABILITY:

This epoxy can be supplied in various different packages.

Product Reviews

Write Review

This product hasn't received any reviews yet. Be the first to review this product!

Find Similar Products by Category

TDS | SDS

Back to Top