behars Loading... Please wait...

Porcelain-Bond Highest Strength Industrial Grade Epoxy Adhesive Hardens Within 24 hours

$4.99
Brand Name:
Atom Adhesives
Quantity:

Product Description

RIGID STAKING COMPOUND EPOXY ADHESIVE


PRODUCT DESCRIPTION:

Porcelain-Bond is a two part, heat-resistant and low exotherm, epoxy adhesive formulation. It is a 100% solid epoxy adhesive, with superior chemical resistance and shear strength.

Porcelain-Bond contains a thixotrophic agent which impedes thinning out of the material during heat cure when properly mixed and cured.

GENERAL PROPERTIES

AppearanceAmber
Cure TypeRoom temperature or Heat Cure
BenefitsRoom temperature or Heat Cure
Tough enamel like cure
Bonds to a variety of substrates
Weather resistant
Mix Ratio by weight100:100 / Resin:Hardener
SubstratesMetals, glass, Porcelains, wood and many plastics
Operating Temperature-60 to 163 C
Typical Application(s)Staking components, bonding, laminating and repair applications

UNCURED PROPERTIES:

Specific Gravity, mixed1.07
Reactive solids contents, %100
Pot Life60 minutes

CURE SCHEDULE:

4 to 6 hours@ 65C
24 hours@ 25C

MISC PROPERTIES:

Shelf Life2 years closed packaging
Glass Transition Temp, Tg93C
Hardness, Shore D78
Lap shear2900 psi (Alum to Alum)

GENERAL INFORMATION:

For safe handling information on this product, consult the Material Safety Data Sheet, (MSDS).

HOW TO USE:

1) Carefully clean and dry all surfaces to be bonded.

2) Apply Porcelain-Bond completely mixed adhesive to the prepared surfaces, and gently press these surfaces together. Contact pressure is adequate for strong, reliable bonds; however, maintain contact until adhesive is completely cured.

3) Some separation of components is common during shipping and storage. For this reason, it is recommended that the contents of the shipping container be thoroughly mixed prior to use.

4) Some ingredients in this formulation provided may crystallize when subjected to low temperature storage. A gentle warming cycle of 52C for 30 minutes prior to mixing components may be necessary. Crystallized epoxy components do not react as well as liquid components and should be re-dissolved prior to use for best results.

AVAILABILITY:

This epoxy can be supplied in various different packages.

Product Reviews

Write Review

This product hasn't received any reviews yet. Be the first to review this product!

Find Similar Products by Category

TDS | SDS

Back to Top