PRODUCT DESCRIPTION:
Flex-Bond 70 Flexible Plastic Bonder Epoxy Adhesive, Plastic bonding is a flexible thixotropic bonding adhesive designed for bonding all types of plastics including nylon, PVC, polyethylene, acrylic, lexan, kapton or almost any thermoplastic substrate. Flex-Bond 70 Flexible Plastic Bonder Epoxy Adhesive, Plastic bonding is low viscosity and easy to apply, can cure at room temperature.
Flex-Bond 70 Flexible Plastic Bonder Epoxy Adhesive, Plastic bonding is high technology epoxy was formulated for applications in the automotive, medial, aerospace, photonic and assembly industries and can be used anywhere that require excellent chemical fastening to plastic parts.
GENERAL PROPERTIES
| Appearance | Amber |
| Cure Type | Room temperature or Heat cure |
| Benefits | Low viscosity
Easy to apply |
| Mix Ratio by weight | 100:100 / Resin:Hardener |
| Operating Temperature | -60 to 115 C |
| Typical Applications | Automotive, Medical, Aerospace, Photonic, Assembly, industries, Also can be used anywhere that requires excellent chemical fastening to plastic parts. |
UNCURED PROPERTIES:
| Viscosity @ 25 C | 3,400 |
| Specific Gravity, mixed | 1.19 |
| Reactive solids contents, % | 100 |
| Pot Life | 60 minutes |
CURE SCHEDULE:
| 1 hour | @ 65C |
| 24 hours | @ 25C |
CURED PROPERTIES:
| Glass transition temperature (Tg), C | 10 |
| Hardness, Shore D | 65 |
| Lap shear strength, psi | 2400 (Alum to Alum) |
GENERAL INFORMATION:
For safe handling information on this product, consult the Material Safety Data Sheet, (MSDS).
HOW TO USE:
1) Carefully clean and dry all surfaces to be bonded.
2) Apply Flex-Bond 70 Flexible Plastic Bonder Epoxy Adhesive, Plastic bonding completely mixed adhesive to the prepared surfaces, and gently press these surfaces together. Contact pressure is adequate for strong, reliable bonds; however, maintain contact until adhesive is completely cured.
3) Some separation of components is common during shipping and storage. For this reason, it is recommended that the contents of the shipping container be thoroughly mixed prior to use.
4) Some ingredients in this formulation provided may crystallize when subjected to low temperature storage. A gentle warming cycle of 52C for 30 minutes prior to mixing components may be necessary. Crystallized epoxy components do not react as well as liquid components and should be re-dissolved prior to use for best results.
AVAILABILITY:
This epoxy can be supplied in various different packages.
Loading... Please wait...
