Product Description

Electro-Bond 04 is a single component, heat curing..

Price: $19.99

]]>

Product Description

Electro-Bond 04 is a single component, heat curing..

Price: $19.99

]]> Product Description

Electro-Bond 04 is a single component, heat curing..]]> https://epoxymarket.com/windshield--defroster-grid-line-and-rear-tab-repair-kit-adhesive Thu, 05 May 2016 11:36:55 +0000 https://epoxymarket.com/windshield--defroster-grid-line-and-rear-tab-repair-kit-adhesive

How To Repair Your Window Defroster Grid With ConductiveX's Defogger Repair Kit

Window Defroster Grid Repair Kit

The Window Defroster Grid Repair kit is an epoxy adh..

Price: $14.99

]]>

How To Repair Your Window Defroster Grid With ConductiveX's Defogger Repair Kit

Window Defroster Grid Repair Kit

The Window Defroster Grid Repair kit is an epoxy adh..

Price: $14.99

]]> How To Repair Your Window Defroster Grid With ConductiveX's Defogger Repair Kit

Window Defroster Grid Repair Kit

The Window Defroster Grid Repair kit is an epoxy adh..]]> https://epoxymarket.com/silver-filled-epoxy-adhesive-electrically-conductive-adhesive-circuit-repair-1--part-heat-cure-adhesive Thu, 05 May 2016 11:34:54 +0000 https://epoxymarket.com/silver-filled-epoxy-adhesive-electrically-conductive-adhesive-circuit-repair-1--part-heat-cure-adhesive

Electro-Bond 01 is a single component epoxy, formulated with pure silver powder combined with organic binders and solvents to produce electrically conductive paths, films or patterns over non-conductive substrates. Electro-Bond 01 shows slight settling when stored for a long period of time, no ..

Price: $18.99

]]>

Electro-Bond 01 is a single component epoxy, formulated with pure silver powder combined with organic binders and solvents to produce electrically conductive paths, films or patterns over non-conductive substrates. Electro-Bond 01 shows slight settling when stored for a long period of time, no ..

Price: $18.99

]]> Electro-Bond 01 is a single component epoxy, formulated with pure silver powder combined with organic binders and solvents to produce electrically conductive paths, films or patterns over non-conductive substrates. Electro-Bond 01 shows slight settling when stored for a long period of time, no ..]]> https://epoxymarket.com/low-cost--silver-epoxy-electrically-conductive-adhesive-emi--rfi-sheilding-system-adhesive Thu, 05 May 2016 11:34:49 +0000 https://epoxymarket.com/low-cost--silver-epoxy-electrically-conductive-adhesive-emi--rfi-sheilding-system-adhesive

Electro-Bond 06 represents the newest technology since the introduction of electrically conductive silver compounds. This unique formulation is based on a silver coated ceramic that results in lower material costs without adversely sacrificingthe properties obtained with a pure silver formulati..

Price: $9.99

Electro-Bond 07 is an epoxy adhesive and coating formulation based on pure silver. This versatile silver formulation offers the maximum continuity of conductivity with an electrical resistivity value of less than 1x10-4 ohmåácm. Electro-Bond 07 is also characterized by a wide opera..

Price: $18.99

Electro-Bond 62 is a two parts adhesives, graphite filled epoxy designed for Esd/Emi Shielding of semiconductor devices and electronics. Electro-Bond 62 can be used in many electronic application. Electro-Bond 62 is free of solvents, develops strong and durable, bonds to different and dissimila..

Price: $9.99

Electro-Bond F3 is an epoxy adhesive and coating formulation based on Nickel. This epoxy nickel formulation offers the maximum continuity of conductivity with an electrical resistivity value of less than 3.8x10-2 ohm-cm. Electro-Bond F3 has been used extensively in such diversified applications..

Price: $9.99

Electro-Bond 17 is a non-bleeding, electrically conductive, silver-filled epoxy formulation recommended for electronic bonding, coating, and sealing applications that require flexibility coupled with good electrical and mechanical properties. Electro-Bond 17 is a non-bleeding, electrically cond..

Price: $18.99

Electro-Bond 24 is a two part electrically conductive composition developed for low shrinkage, low resistivity bonding applications where good electrical and physical properties over a wide temperature range (Up to 190å¡C) are required. This smooth paste formulation of refined pure ..

Price: $18.99

Electro-Bond 16 is an electrically conductive, silver-filled epoxy formulation recommended for electronic bonding, coating, and sealing applications that require high flexibility coupled with good electrical and mechanical properties. elector Bond 16 is two-part, smooth paste adhesive of refine..

Price: $18.99

Electro-Bond 19 is an electrically conductive, silver-filled epoxy formulation recommended for electronic bonding, coating, and sealing applications that require high flexibility coupled with good electrical and mechanical properties. elector Bond 19 is two-part, smooth paste adhesive of refine..

Price: $18.99

Electro-Bond 20 is one part Electrically Conductive Adhesives, used in a variety of applications where electrical connectivity is needed, providing a conductive path where traditional methods such as solder, are not practical. Electrically Conductive Adhesives are ideal for attaching temperatur..

Price: $18.99

Electro-Bond 79 is one-part epoxy adhesive with superior electrical conductivity and bonding capability. It has been shown to retain these properties through hundreds of hours of rapid temperature cycling (-40 to 150å¡C). It also has superior impact absorption and stress resistance...

Price: $18.99

Electro-Bond 03 is an epoxy adhesive and coating formulation based on Nickel. This epoxy nickel formulation offers the maximum continuity of conductivity with an lectrical resistivity value of less than 3.8x10-2 ohm-cm. Electro-Bond 03 is recommended for electronic bonding and sealing applicati..

Price: $9.99

Electro-Bond 02LP is Long Pot Life Curing, electrically conducting silver-filled epoxy compound recommended for electronic bonding and sealing applications that require a combination of good mechanical and electrical properties. Electro-Bond 02 is two-part, smooth paste formulation of refined p..

Price: $18.99

Electro-Bond 02 is an electrically conducting silver-filled epoxy compound recommended for electronic bonding and sealing applications that require a combination of good mechanical and electrical properties. Electro-Bond 02 is two-part, smooth paste formulation of refined pure silver and epoxy ..

Price: $18.99

Electro-Bond 04 is a single component, heat curing, conductive epoxy polymer that was designed for ease in handling. This high performance conductive polymer cures quickly at elevated temperatures making it ideally suited for rapid processing and assembly. Electro-Bond 04 passes NASAÌ&os..

Price: $18.99

Electro-Bond 61 is an epoxy adhesive and coating formulation based on conductive carbon . Electro-Bond 61 is recommended for electronic bonding and sealing applications that required both electrical and mechanical properties. Electro-Bond 61 cures at room temperature or can be accelerated with ..

Price: $9.99