How do I use this pouch?

AA-BOND F112 Fiber Optic Epoxy Adhesive, Two Part, Long Pot Life, Impact Resistant

$6.99

Brand Name:

Atom Adhesives

* Size:

2.5gm pouch(s)
5gm pouch(s)
10gm pouch(s)
100gm kit(s)
250gm kit(s)

Quantity:

TDS
Product Review
Find Similar Products by Category

Product Description

FIBER OPTIC ASSEMBLY EPOXY ADHESIVE

PRODUCT DESCRIPTION:

AA-BOND F112 is an impact resistant, fiber-optic adhesive.

AA-BOND F112 is two-part, low viscosity epoxy has the distinct advantage of remaining below 3000 cps for a minimum of 40 minutes.

AA-BOND F112 allows more connectors to be produced from one mix. Low stress, AA-BOND F112 is an excellent choice for multimode connectors and single mode connectors where excessive curing temperatures may cause cracking.

AA-BOND F112 can be cured at room temperature overnight or as fast as 15 minutes at 90C. The blue color facilitates easy polishing and its cured properties prevent pistoning. This product is a 100% solid system that can be used for small potting and sealing applications where resistance to thermal shock and impact are required.

GENERAL PROPERTIES

Appearance	Blue
Components	2 component - requires mixing
Mix Ratio by weight	100:30 / Resin:Hardener
Benefits	Low viscosity Thermal shock and impact resistant Low stress connections
Cure Type	Room temperature or Heat Cure
Operating Temperature	-60 to 100 C
Typical Applications	Fiber optic assembly, multimode and single mode connectors, small potting and sealing applications

UNCURED PROPERTIES:

Viscosity @ 25 C	2300
Thixotropic Index	1.0
Specific Gravity, cured	1.2
Pot Life	30 minutes

CURE SCHEDULE:

24 hours	@ 25C
1 hour	@ 65C
15 minutes	@ 90C

CURED PROPERTIES:

Glass Transition Temperature (Tg), ultimate, C	102
Hardness, Shore D	85
Refractive Index	1.51
Water Absorption , after 24 hours saturation, %	0.07

GENERAL INFORMATION:

For safe handling information on this product, consult the Material Safety Data Sheet, (MSDS).

HOW TO USE:

1) Carefully clean and dry all surfaces to be bonded.

2) Apply AA-BOND F112 completely mixed adhesive to the prepared surfaces, and gently press these surfaces together. Contact pressure is adequate for strong, reliable bonds; however, maintain contact until adhesive is completely cured.

3) Some separation of components is common during shipping and storage. For this reason, it is recommended that the contents of the shipping container be thoroughly mixed prior to use.

4) Some ingredients in this formulation provided may crystallize when subjected to low temperature storage. A gentle warming cycle of 52C for 30 minutes prior to mixing components may be necessary. Crystallized epoxy components do not react as well as liquid components and should be re-dissolved prior to use for best results.

AVAILABILITY:

This epoxy can be supplied in various different packages.