How do I use this pouch?

AA-BOND F156 High Temp, Fast Cure, Low Visc, 2 Part, Fiberoptics Epoxy Adhesive

$3.99

Brand Name:

Atom Adhesives

* Size:

5gm pouch(s)
10gm pouch(s)
100gm kit(s)
250gm kit(s)
500gm kit(s)

Quantity:

TDS
Product Review
Find Similar Products by Category

Product Description

OPTICALLY OPAQUE EPOXY ADHESIVE

PRODUCT DESCRIPTION:

AA-BOND F156 is a black, solvent free thixotropic epoxy recommended for high quality photographic industry , laminating, production and repair applications where a room temperature cure optically opaque adhesive for light sensitive components is required.

AA-BOND F156 is two parts smooth paste formulation is easy to use, develops strong bonds to itself and to most materials.

AA-BOND F156 exhibits low shrinkage during cure, has excellent dimensional stability over a wide temperature range.

GENERAL PROPERTIES

Appearance	Black
Cure Type	Room Temperature or Heat cure
Benefits	Easy to use Good low-temperature structural, physical and electrical properties Its resistant to water, weather, gases, salts, mild acids, alkalis, and many organic and inorganic compounds
Mix Ratio by weight	100:12 / Resin:Hardener
Substrates	Glass and glass fabrics, ceramics, leather, metals and many plastics
Operating Temperature	-60 to 130 C
Typical Applications	High quality photographic industry bonding, laminating, production and repair applications where a room-temperature cure optically opaque adhesive for light sensitive components is required

UNCURED PROPERTIES:

Viscosity @ 25 C, cps	50,000 After mixing
Specific Gravity, mixed, g/cc	1.57
Pot life	30 minutes
Reactive solids contents, %	100

CURE SCHEDULE:

4 hours	@ 65C
24 hours	@ 25C

CURED PROPERTIES:

Glass transition temperature (Tg), C	95
Hardness, Shore D	90
Dielectric Constant	4.3 @ Frequency 1000 Hz
Dielectric Strength	15.4 kV/mm 390 kV/in

GENERAL INFORMATION:

For safe handling information on this product, consult the Material Safety Data Sheet, (MSDS).

HOW TO USE:

1) Carefully clean and dry all surfaces to be bonded.

2) Apply this completely mixed adhesive to the prepared surfaces, and gently press these surfaces together. Contact pressure is adequate for strong, reliable bonds; however, maintain contact until adhesive is completely cured.

3) Some separation of components is common during shipping and storage. For this reason, it is recommended that the contents of the shipping container be thoroughly mixed prior to use.

4) Some ingredients in this formulation provided may crystallize when subjected to low temperature storage. A gentle warming cycle of 52C for 30 minutes prior to mixing components may be necessary. Crystallized epoxy components do not react as well as liquid components and should be re-dissolved prior to use for best results.

AVAILABILITY:

This epoxy can be supplied in various different packages.