How do I use this pouch?

AA-BOND FDA2T Food & Drug Administration Medical Grade Epoxy Adhesive, Room Temp Cure

$4.99

Brand Name:

Atom Adhesives

* Size:

2.5gm pouch(s)
5gm pouch(s)
10gm pouch(s)
100gm kit(s)

Quantity:

TDS
Product Review
Find Similar Products by Category

Product Description

FOOD AND DRUG APPLICATIOON EPOXY ADHESIVE

PRODUCT DESCRIPTION:

AA-BOND FDA2T is a thixotropic epoxy resin system specifically developed for medical device applications. It has been tested in accordance with USP biological reactivity tests, in vivo and received Class VI approval.

AA-BOND FDA2T is an effective electrical insulator, and it provides low permeability to gases and vapors and good resistance to water, weather, lubricants and fuels, to mild acids and alkalis, and many other organic and inorganic compounds.

PRODUCT PROPERTIES:

Appearance	Amber
Cure Type	Heat cure or Room Temperature
Benefits	Medium viscosity Electrically Insulating Low permeability to gases and vapors Low temperature cure
Mix Ratio by weight	100:93 / Resin: Hardener
Typical Applications	Medical, Food preparation processing and packaging

UNCURED PROPERTIES:

Viscosity @ 25 C, cps	25000 1000
Specific Gravity, mixed	1.119
Pot Life	3 hours

CURE SCHEDULE:

1 to 4 Hours	@ 65C
24 Hours	@ 25C

THERMAL PROPERTIES:

CTE, linear	29.4 in/in-F @ temperature 68 F
Glass Transition Temp, Tg	70.0 C, 158 F
Operating Temperature	-70 to 145 C

CURED PROPERTIES:

Coefficient of Thermal Expansion, cm/cm/C	5.3010-05
Hardness, Shore D	79
Elongation at Yield	9.0 %
Adhesive Bond Strength	1800 psi

ELECTRICAL PROPERTIES:

Volume Resistivity	1.20e+14 ohm-cm
Dielectric Constant	3.4 @ frequency 1000 Hz
Dielectric Strength	420 kV/in
Dissipation Factor	0.020

GENERAL INFORMATION:

For safe handling information on this product, consult the Material Safety Data Sheet, (MSDS).

HOW TO USE:

1) Carefully clean and dry all surfaces to be bonded.

2) Apply AA-BOND FDA2T completely mixed adhesive to the prepared surfaces, and gently press these surfaces together. Contact pressure is adequate for strong, reliable bonds; however, maintain contact until adhesive is completely cured.

3) Some separation of components is common during shipping and storage. For this reason, it is recommended that the contents of the shipping container be thoroughly mixed prior to use.

4) Some ingredients in this formulation provided may crystallize when subjected to low temperature storage. A gentle warming cycle of 52C for 30 minutes prior to mixing components may be necessary. Crystallized epoxy components do not react as well as liquid components and should be re-dissolved prior to use for best results.

AVAILABILITY:

This epoxy can be supplied in various different packages.