How do I use this pouch?

AA-BOND FDA16 FDA Medical Grade Epoxy Adhesive, Two Part, Room Temp Cure

$4.99

Brand Name:

Atom Adhesives

* Size:

2.5gm pouch(s)
5gm pouch(s)
10gm pouch(s)
100gm kit(s)

Quantity:

TDS
Product Review
Find Similar Products by Category

Product Description

FOOD AND DRUG APPLICATIOON EPOXY ADHESIVE

PRODUCT DESCRIPTION:

AA-BOND FDA16 is a medium viscosity epoxy resin system specifically developed for medical device applications.

AA-BOND FDA16 has been tested in accordance with USP biological reactivity tests, in vivo and received Class VI approval.

PRODUCT PROPERTIES:

Appearance	Amber
Mix Ratio, by weight	100:33 / Resin:Hardener
Benefits	Medium viscosity low permeability good resistance class VI approved
Cure Type	Heat cure or Room temperature
Typical Applications	Bonding, laminating and repair applications by manufacturers of food preparation, processing and packaging equipment, and by manufacturers of catheters, hearing aids, dental products and other biomedical instruments and devices.

UNCURED PROPERTIES:

Viscosity @ 25 C, cps	4,700 @ temperature 77F, 25C
Specific Gravity, cured	0.900 g/cc
Pot Life	25 min
Solids Content	100%
Volatile Organic Compounds (VOC) Content	0.15 g/l
Water Absorption , after 24 HR saturation, %	0.30

MECHANICAL PROPERTIES:

Lap Shear Strength alum to alum	2,100 24 HR @ 25C 3300 4 HR @ 65C
Hardness, Shore D	86 4 hrs @ 65C 75 24 hrs @ 25C

CURED SCHEDULE:

1 4 hours	@ 65C
24 hours	@ 25C

ELECTRICAL PROPERTIES:

Volume Resistivity	1.20e+14 ohm-cm

THERMAL PROPERTIES:

CTE, linear	29.4 in/in-F @ temperature 68.0 F
Glass Transition Temp, Tg	97.0 C, 207 F
Operating Temperature	-70 to 145 C

GENERAL INFORMATION:

For safe handling information on this product, consult the Material Safety Data Sheet, (MSDS).

HOW TO USE:

1) Carefully clean and dry all surfaces to be bonded.

2) Apply AA-BOND FDA16 completely mixed adhesive to the prepared surfaces, and gently press these surfaces together. Contact pressure is adequate for strong, reliable bonds; however, maintain contact until adhesive is completely cured.

3) Some separation of components is common during shipping and storage. For this reason, it is recommended that the contents of the shipping container be thoroughly mixed prior to use.

4) Some ingredients in this formulation provided may crystallize when subjected to low temperature storage. A gentle warming cycle of 52C for 30 minutes prior to mixing components may be necessary. Crystallized epoxy components do not react as well as liquid components and should be re-dissolved prior to use for best results.

AVAILABILITY:

This epoxy can be supplied in various different packages.